Shri Swami Samarth Paints
Shri Swami Samarth Paints
Dombivli East, Dombivli, Maharashtra
Send E-mail
Send SMS
Home  » Our Products  » 

Epoxy Floor Coating


Leading Manufacturer of epoxy floor coatings and epoxy floor primer (transparent) from Dombivli.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 500 / Litre Get Latest Price

Product Details:
Minimum Order Quantity1 Litre
Brand3S
Application MethodBrush , Roller, Spray
ClassificationGravelled Epoxy Coating, Self Dispersing, Mortar Epoxy Coating, Self Levelling
Packing Size2 L , 5 L, 20 L, 10 L
TypesSolvent Based

Mixing of components:

Just before application base has to mix along with hardener as per the ratio mentioned on the container, chemical reaction initiates after mixing base with hardener the entire mix has to be consumed within 20 – 30 minutes for 3S HB FLOOR Coating (3:1) and 5-6 hours is pot life for 3S HB FLOOR Epoxy Primer / Paint (4:1). Make sure surface free from dirt, minute particles, i.e the expected surface should be clean and neat before application of 3S HB FLOOR Epoxy Primer (4:1) by brush.

Application system:

Any surface that requires application of epoxy should be free from water seepages, dirt dust and other particles. Surface preparation is desired before application of any type of coating.

Surface preparation PRIMER application:

FOR rough surface like cement concrete OR if there are any cracks on the surface apply 3S HB FLOOR Epoxy Primer (4:1) two coats. Then fill the gaps with using EPOXY grout. One can mix sand/rangoli/fine powder is to mixed in 3S HB FLOOR Epoxy Primer (4:1) i.e after mixing base along with hardener to make it fluffy/thick as desired for making the grout. Grout can applied using wall putty applicator OR brick plaster applicator. Now the surface is ready for coating any type of epoxy coating.

Surface preparation PRIMER application:

FOR smooth surface like tiles, chips, marbeletc apply one to three coats of primer 3S HB FLOOR Epoxy Primer (4:1).

Painting OR Printing application:

Apply 3S HB FLOOR Epoxy Paint (4:1) by brush followed by roller, this part is an artist’s/designer/creator job hence the product can be applied by spray gun instead of brush. Now a day 3D Images stickers are printed in the market, any size, they are directly pasted on 3S HB FLOOR Epoxy Primer (4:1) eliminating the use of 3S HB FLOOR Epoxy Paint (4:1). This is almost final, once done the desired output is achived.

Epoxy floor coating application:

Finally the desired substrate/floor is ready for application of 3S HB FLOOR Coating (3:1) by pouring the mixture on the floor, then spreading the mix on the floor using serrated / straight squeegee followed by roller application to eliminate bubbles and pinholes. These coating are applied for self leveling properties which are available in transparent glossy, semi-glossy and matt finishes which adds value to the entire sandwich from stresses to impact / abrasion / water / solvent. After application of 3S HB FLOOR Coating (3:1), 2 – 3 coats depending upon the dry film thickness, the entire job is ready for day to day use.


Yes! I am Interested
View PDF


Get Best Quote

Approx. Rs 420 / Litre Get Latest Price

Product Details:
Minimum Order Quantity1 Litre
State/FormLiquid, Powder, Solvent
Packaging Size1,4,20
Brand3
ColorAny

3‘‘S’’ FLOOR Coating

These are high performance TWO PACK EPOXY based transparent protective coats with higher dry film thickness and self leveling properties. Epoxy based products have excellent resistance to the effects of moisture and solvents/chemicals. They form the finish coat in floor coatings.

Technical Data

 

 

Observation

Result

Color

Transparent / Semiglossy / Matt.

Finish

Smooth & homogenous

Consistency

Semiliquid & uniform.

Pot Life

2 hours

Mixing Ratio by Volume

3 : 1 By volume – BASE : HARDENER

Dry film thickness

0.5 mm – 1 inch/coat

Drying time

Touch dry in 8 Hours. Tack Free 12 hours Total curing 7 days.

(Full CURE 7 days OR Curing @ 90oC for 90 Minutes)

Interval before over coating

16 - 18 hours minimum

Method of Application

SQUEEGEE followed by ROLLER

Covering Capacity

1-2 Sq Mtrs /Ltr

Uses

ELECTRICAL GRADE

Shelf Life

6 Months


Yes! I am Interested


 

Explore More Products
 

 

Send SMS
Shri Swami Samarth Paints
Pralhad Parnaik  (Partner)
Ishwar Krupa, Chittaranjandas Road, Ramnagar
Dombivli East, Dombivli - 421201 , Maharashtra , India
Send E-mail
Share Us:
X